ORACLE:
======================
/u01/app/oracle/product/10.2.0/asm/network/admin
TNS Listener
set shmsys:shminfo_shmmax=4294967295
TNS listener

CSN_TNS =
  (DESCRIPTION =
    (LOAD_BALANCE = off)
    (FAILOVER = on)
    (ADDRESS_LIST =
      (ADDRESS = ( PROTOCOL = tcp)(HOST = 172.16.0.11)(PORT = 1521))
      (ADDRESS = ( PROTOCOL = tcp)(HOST = 172.16.200.11)(PORT = 1521))
    )
    (CONNECT_DATA =
      (SERVICE_NAME = csn.newstep.com)
      (FAILOVER_MODE = (TYPE = session)(METHOD = basic))
    )
  )


#The following is used by all cdr process
CDR_TNS_1 =
  (DESCRIPTION =
    (LOAD_BALANCE = off)
    (FAILOVER = on)
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = tcp)(HOST = 172.16.0.11)(PORT = 1521))
      (ADDRESS = (PROTOCOL = tcp)(HOST = 172.16.200.11)(PORT = 1521))
    )
    (CONNECT_DATA =
      (SERVICE_NAME = cdr.newstep.com)
      (FAILOVER_MODE = (TYPE = session)(METHOD = basic))
    )
  )



CSN31_CSN03 =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = csn03)(PORT = 1521))
    )
    (CONNECT_DATA =
      (SERVICE_NAME = csn31.newstep.com)
    )
  )


  /u01/app/oracle/product/10.2.0/network/admin/tnsnames.ora
  /u01/app/oracle/product/10.2.0/asm/network/admin/tnsnames.ora

  CSN_CSN09 =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.24.10.53)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = csn.newstep.com)
    )
  )

  CSN_BACKUP_TNS =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = ( PROTOCOL = tcp)(HOST = 172.24.30.10)(PORT = 1521))
      (ADDRESS = ( PROTOCOL = tcp)(HOST = 172.24.40.10)(PORT = 1521))
    )
    (CONNECT_DATA =
      (SERVICE_NAME = csn.newstep.com)
    )
  )




ENABLE DNS [Solaris]
==============================
/etc/nsswitch.conf - add dns to entry hosts
/etc/resolv.conf:
domain newstep.local
nameserver 172.0.0.11
nameserver 172.0.0.1


user config [Solaris]
================================
passwd - which shell

csnr35:x:1002:100::/home/csnr35:/usr/bin/ksh
netops::100:
dba::101:oracle,csn,csnr35
oinstall::102:csn,csnr35


mkdir -p -- creates with parent directories
/usr/sfw/bin/gtar -xvf load.tar

===enable FTP
/etc/.inetd.conf
service-name endpoint-type protocol wait-status uid server-program server-arguments
ftp     stream  tcp6    nowait  root    /usr/sbin/in.ftpd       in.ftpd -a
kill -1

CVS
=========
#cvspserver stream tcp nowait root /usr/local/bin/cvs -f --allow-root=/home/mnss/DEPOT --allow-root=/home/newstep/CVSREPO --allow-root=/home/newstep/ARES pserver
cvspserver stream tcp nowait root /usr/local/bin/cvs -f --allow-root=/home/mnss/DEPOT --allow-root=/home/newstep/ARES pserver


=======================enable ftp LINUX
/etc/init.d/vsftpd start

sftp <user>@<host>
scp <user>@<host>:<path>

==========================process logs
grep destructMsgHandle sns.log  >msgnum
grep buildAnd sns.log  >>msgnum
grep copyM sns.log >copy

awk '{ printf("%s\n",$10)}' destroy >>msg
awk '{ printf("%s\n",$1)}' msg | sort | uniq -c >leak

MANPATH=/usr/man:/usr/share/man:/usr/local/man:/opt/SUNWspro/man

ps -aux www
==========================REMOVE FILES=======
find . -name "*.so" -exec rm {} \;
find . -name "*.o" -exec rm {} \;

find . -name "Sun*" -exec rm -rf {} \;
find . -name core -exec rm {} \;

==================DELETE FILES==================
for item in `find . -name "*.o" -exec ls {} \;`
do
rm -rf $item
done

=================DELETE SH-MEM SEGMENTS/SEMA===========
for item in `ipcs -s|grep csnrel33|awk '{print $2}'`
do
ipcrm -s $item
done

===============================CSN commands
tms -P 39710 -s nse_sip2
tms -s nse_sip
llm -P39197 -s -B4 -L"TRACE(3)"
======================================compile RV SIP STACK
export SUNWS=on
export PATH=$PATH:/usr/ccs/bin //for ar
gmake release=on serverTK=on nosamples=on tls=on srv=on



=====DEFUNC
ps -ef | grep -v \ \ root | grep -v pts/ | less
# now use /usr/proc/bin/ptree to find parent or child
## Linux users might try ps -ef --forest | less

clarion:/# /usr/proc/bin/ptree 13868
13868 <defunct>
  16596 a.out
clarion:/# kill -9 16596


# ta daa !
#
# or
#
bash# /usr/proc/bin/ptree `ps -ef | grep -v ^\ \ \ \ root | awk '/<defunct>/ {print $2}'` | less


==============DIAGNOSTIC===============
/usr/sbin/psrinfo
pstack <pid>
pstack <pid> core

vmstat 5 10
truss -f <script> 2>truss.log
pfiles -F <pid>

tcpdump -w <file> -s 1024 <ptorocol> &
diff -wb
==========================NDD================
#ndd Solaris
/usr/sbin/ndd -set /dev/tcp tcp_max_buf  10485760

==========NDD=========
#!/bin/ksh
#
# ndd.sh
#
PATH=/usr/sbin:$PATH
if [ -z "$1" ]; then
   echo "Usage: $0 [udp | tcp | ip | icmp | arp | ... ]"
   exit
fi

ndd /dev/$1 '?' | nawk -v c="ndd /dev/$1" '
/write/ {
  split($0,a,/[ \t(]/);
  n=c t " " a[1];
  printf "echo %s = ",a[1];
  printf "`%s`\n",n;


}' | sh
``````````````````````````````````````````````````````````
======================
SAR
=======================
sar -g 5 5
sar -urg 5 5
sar -urg 5 5 -o <filename>

read:
sar -f <filename>

===runSAR.sh=======
#!/usr/bin/sh
/usr/bin/sar -urg -o $HOME/logs/sarbin.log 5 200 1>/dev/null&
===========================
======NETSTAT===========
netstat -an |grep <port>
netstat -i #displays errors
netstat -i hme0
netstat -s -P ip  #shows statistics
netstat -rn   #shows routing tables
netstat -a |grep ftp


++++++++++++++++++++++++
nfsstat -rc\
===============================
VI
===============================
#vi
:%s/xxx/yyy/g

===============================
DBX
===============================
#dbx -----compile with -g flag
ignore SIGUSR1
stop in
stop at
print <expr>
dbx <bin> pid
where
examine <addr>
dump
detach

(dbx) dbxenv core_lo_pathmap on
(dbx) pathmap /usr      /net/core-host/usr
(dbx) pathmap /appstuff /net/core-host/appstuff
(dbx) debug prog prog.core



=======================================
GDB
=======================================
scp csn@172.24.15.53:/home/csn/dumps/sipconn/core .
GDB commands
================
backtrace
info threads
thread 4
handle SIGUSR1 nostop
handle SIGUSR1 noprint

break <filename>:<line#>


==========================================
Purify
========================================
start_lmgrd_on_torss001 stop
start_lmgrd_on_torss001 start
start_lmgrd_on_torss001 lmreread
/opt/Rational/releases/PurifyPlus.7.0.0.0-004/sun4_solaris2/bin/purify

rational.opt -- user
ps -ef |grep Rational
start_lmgrd_on_tordev01 lmreread
20:16:56 (lmgrd) FLEXlm (v7.0f) started on tordev01 (Sun) (8/13/2007)
20:16:56 (lmgrd) FLEXlm Copyright 1988-1999, Globetrotter Software, Inc.
20:16:56 (lmgrd) US Patents 5,390,297 and 5,671,412.
20:16:56 (lmgrd) World Wide Web:  http://www.globetrotter.com
20:16:56 (lmgrd) License file(s): /opt/Rational/config/tordev01.dat
20:16:56 (lmgrd) lmgrd tcp-port 27000
20:16:56 (lmgrd) Starting vendor daemons ...
20:16:56 (lmgrd) Started rational (internet tcp_port 63600 pid 14127)
20:16:56 (rational) FLEXlm version 7.0f
20:16:56 (rational) Using options file: "/opt/Rational/config/rational.opt"
20:16:56 (rational) Server started on tordev01 for:     PurifyPlusUNIX
20:16:56 (rational) INCLUDE USER_GROUP PurifyPlus_000 PurifyPlusUNIX



==========================================
CRONTAB:
==============================================
root/root
csnd01:crontab -l root
crontab: you must be super-user to access another user's crontab file
csnd01:whoami
oracle
csnd01:su - root
Password:
Sun Microsystems Inc.   SunOS 5.10      Generic January 2005
# crontab -l root
#ident  "@(#)root       1.21    04/03/23 SMI"
#
# The root crontab should be used to perform accounting data collection.
#
#
10 3 * * * /usr/sbin/logadm
15 3 * * 0 /usr/lib/fs/nfs/nfsfind
30 3 * * * [ -x /usr/lib/gss/gsscred_clean ] && /usr/lib/gss/gsscred_clean
#10 3 * * * /usr/lib/krb5/kprop_script ___slave_kdcs___
#
``````````````````````````````````````````````````````````
crontab -e = edits the crontab file to be used.

0 12 14 2 * mailx john%Happy Birthday!%Time for lunch.

Below is a table that represents what each of the above fields are for.

min hour dayofmonth monthofyear dayofweek command
0    12    14          2          *          mailx john%Happy Birthday!%Time for lunch.

#  crontab -l oracle
#m      h       dom     mon     dow     command
5       4       *       *       0       /home/oracle/db-maintenance/config-db-maintenance.sh
15      4       *       *       0       /home/oracle/db-maintenance/cdr-db-maintenance.sh
25      4       *       *       *       /home/oracle/db-maintenance/om-maintenance.sh
0       *       *       *       *       /home/oracle/db-maintenance/cdr-switch.sh
30      4       *       *       *       /log_manager.ksh



  Options Explanation
* Is treated as a wild card. Meaning any possible value.
*/5 Is treated as ever 5 minutes, hours, days, or months. Replacing the 5 with another numerical value will change this option.
2,4,6 Treated as an OR, so if placed in the hours, this could mean at 2, 4, or 6 o-clock.
9-17 Treats for any value between 9 and 17. So if placed in day of month this would be days 9 through 17. Or if put in hours it would be between 9 and 5.

==============================================hardware
swap -s
prtdiag
prtconf
df -h /tmp /u01 /u02
Filesystem             size   used  avail capacity  Mounted on
swap                   9.5G   2.6M   9.5G     1%    /tmp
/dev/md/dsk/d5          32G   4.1G    27G    14%    /u01
/dev/md/dsk/d6          15G   4.3G    11G    29%    /u02
isainfo -v
metastat
d6: Mirror
    Submirror 0: d16
      State: Okay
    Submirror 1: d26
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 32563200 blocks (15 GB)

d16: Submirror of d6
    State: Okay
    Size: 32563200 blocks (15 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t0d0s6          0     No            Okay   Yes


d26: Submirror of d6
    State: Okay
    Size: 32563200 blocks (15 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t1d0s6          0     No            Okay   Yes


d4: Mirror
    Submirror 0: d14
      State: Okay
    Submirror 1: d24
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 10247232 blocks (4.9 GB)

d14: Submirror of d4
    State: Okay
    Size: 10247232 blocks (4.9 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t0d0s4          0     No            Okay   Yes


d24: Submirror of d4
    State: Okay
    Size: 10247232 blocks (4.9 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t1d0s4          0     No            Okay   Yes


d3: Mirror
    Submirror 0: d13
      State: Okay
    Submirror 1: d23
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 4100928 blocks (2.0 GB)

d13: Submirror of d3
    State: Okay
    Size: 4100928 blocks (2.0 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t0d0s3          0     No            Okay   Yes


d23: Submirror of d3
    State: Okay
    Size: 4100928 blocks (2.0 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t1d0s3          0     No            Okay   Yes


d1: Mirror
    Submirror 0: d11
      State: Okay
    Submirror 1: d21
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 16393536 blocks (7.8 GB)

d11: Submirror of d1
    State: Okay
    Size: 16393536 blocks (7.8 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t0d0s1          0     No            Okay   Yes


d21: Submirror of d1
    State: Okay
    Size: 16393536 blocks (7.8 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t1d0s1          0     No            Okay   Yes


d0: Mirror
    Submirror 0: d10
      State: Okay
    Submirror 1: d20
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 12292608 blocks (5.9 GB)

d10: Submirror of d0
    State: Okay
    Size: 12292608 blocks (5.9 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t0d0s0          0     No            Okay   Yes


d20: Submirror of d0
    State: Okay
    Size: 12292608 blocks (5.9 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t1d0s0          0     No            Okay   Yes


d5: Mirror
    Submirror 0: d15
      State: Okay
    Submirror 1: d25
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 67588992 blocks (32 GB)

d15: Submirror of d5
    State: Okay
    Size: 67588992 blocks (32 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t0d0s5          0     No            Okay   Yes


d25: Submirror of d5
    State: Okay
    Size: 67588992 blocks (32 GB)
    Stripe 0:
        Device     Start Block  Dbase        State Reloc Hot Spare
        c1t1d0s5          0     No            Okay   Yes


Device Relocation Information:
Device   Reloc  Device ID
c1t1d0   Yes    id1,sd@SSEAGATE_ST373453LSUN72G_3HW36H5100007540K9M4
c1t0d0   Yes    id1,sd@SSEAGATE_ST373453LSUN72G_3HW356T000007546YKE8
csn04:/home/csn/logs$

sysdef |more


LINUX
============
valgrind
fuser -n tcp 41012
pkill -x <name>
ulimit -c 10000
for f in apr-0.9.12-2.i386.rpm apr-util-0.9.12-1.i386.rpm subversion-1.4.3-1.i386.rpm subversion-perl-1.4.3-1.i386.rpm subversion-tools-1.4.3-1.i386.rpm ; do wget http://csn1build/3p/$f; done
yum install neon
yum info ...
yum list ...
======RPM
rpm -Uvh *rpm
U- upgrade; v-verbose; h-hash markers [print]
/var/lib/rpm/Packages


/etc/init.d/vsftpd start
chkconfig vsftpd on
./upgrade.sh -n 129 >u.log 2>&1


For build:



 CVS - SVN
=============
http://cvsbook.red-bean.com/cvsbook.html
http://cvsbook.red-bean.com/OSDevWithCVS_3E.pdf
http://svnbook.red-bean.com/
http://svnbook.red-bean.com/index.ru.html

cvs up -j SNS-ATT-20070720

=================================
svn update -r 73
svn status
svn info
svn commit -m 'D0: TLS support - fake DB, without SICC'
svn checkout http://torsvn.newstep.local/svn/main/trunk/sns
svn checkout http://torsvn.newstep.local/svn/main/builds/R3_5-184/
svn checkout http://torsvn.newstep.local/svn/main/branches/R3_5_OCS/
svn checkout http://torsvn.newstep.local/svn/main/branches/R3_5/db

http://torsvn.newstep.local/viewvc/main/branches/R3_5/sns/
http://torsvn.newstep.local/viewvc/main/builds/

svn delete -m 'D0: network selection - removed obsolete test suit' http://torsvn.newstep.local/svn/main/trunk/
svn up


/usr/sfw/bin/wget http://csn1build.newstep.local/builds/CSN_R3_6/CSN_R3_6-38.tar.gz
SSL
/usr/share/ssl
===============================================================================================================================================
FYI, in case you didn’t know already, this is how to debug a core file on a machine other than the machine on which the core file was created.

Go to a directory on the machine on which you want to debug:

$ cd
$ pwd
/home/cwells
mkdir debug_core
cd debug_core

Create subdirectories to contain the executable and *.so files of the process which crashed:

$ mkdir bin
$ mkdir lib


Populate the bin directory with the executable which was running on the remote machine:

$ cd bin
$ scp csn@csnd03:/home/csn/bin/mag mag

Under the lib directory, create subdirectories to match the folder structure in which the *so are located on the remote machine:


$ cd ../lib
$ mkdir home
$ mkdir home/csn
$ mkdir home/csn/lib

Populate the leaf of the lib directory with the *.so files which were running on the remote machine:

$ scp csn@csnd03:/home/csn/lib/*.so home/csn/lib


Create a directory to contain the core file, and get the core file from the remote machine:

$ cd ..
$ mkdir core
$ cd core
$  scp csn@csnd03:/home/csn/dumps/mag/core_jtapi_call
Start gdb:
$ cd ..

$ pwd

/home/cwells/debug_core

$ gdb

GNU gdb 6.6
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "sparc-sun-solaris2.10".
Use the set solib-absolute-prefix command to specify the location of the root of the *.so files:
(gdb) set solib-absolute-prefix /home/cwells/debug_core/lib

Use the file and core commands to specify the executable and the core file:

(gdb) file /home/cwells/debug_core/bin/mag
Reading symbols from /home/cwells/debug_core/bin/mag...done.
(gdb) core  /home/cwells/debug_core/core/core_jtapi_call


gzcat CSN_R3_6-38.tar.gz | tar xf - ./bin/csn_install.sh
    mv ./bin/csn_install.sh .
    ./csn_install.sh

========================================
--------------
pkgadd -d ./ngrep-1.44.1-sol10-sparc-local
-d Install or copy a package from device.  device  can  be a full path name to a directory or the identifiers for tape, floppy disk, or removable  disk
Used without the -d option, pkgadd looks in the default spool  directory  for the package (var/spool/pkg)
---------------
pkginfo |grep ngrep
pkginfo -l|grep ngrep
gunzip -c *gz > ngrep-1.44.1-sol10-sparc-local

tee
gzcat
gawk
find . -name "*.xml" | xargs perl -i -pe 's/172\.16\.0\.10:5070/172.16.0.10:loriPort/g'

=====================================NAGIOS
 -------------------------
        Nagios executable:  nagios
        Nagios user/group:  nagios,nagios
       Command user/group:  nagios,nagios
            Embedded Perl:  no
             Event Broker:  yes
        Install ${prefix}:  /usr/local/nagios
                Lock file:  ${prefix}/var/nagios.lock
   Check result directory:  ${prefix}/var/spool/checkresults
           Init directory:  /etc/rc.d/init.d
  Apache conf.d directory:  /etc/httpd/conf.d
             Mail program:  /bin/mail
                  Host OS:  linux-gnu

 Web Interface Options:
 ------------------------
                 HTML URL:  http://localhost/nagios/
                  CGI URL:  http://localhost/nagios/cgi-bin/

*** Compile finished ***


If the main program and CGIs compiled without any errors, you
can continue with installing Nagios as follows (type 'make'
without any arguments for a list of all possible options):

  make install
     - This installs the main program, CGIs, and HTML files

  make install-init
     - This installs the init script in /etc/rc.d/init.d

  make install-commandmode
     - This installs and configures permissions on the
       directory for holding the external command file

  make install-config
     - This installs *SAMPLE* config files in /usr/local/nagios/etc
       You'll have to modify these sample files before you can
       use Nagios.  Read the HTML documentation for more info
       on doing this.  Pay particular attention to the docs on
       object configuration files, as they determine what/how
       things get monitored!


*** Support Notes *******************************************

If you have questions about configuring or running Nagios,
please make sure that you:

     - Look at the sample config files
     - Read the HTML documentation
     - Read the FAQs online at http://www.nagios.org/faqs

before you post a question to one of the mailing lists.
Also make sure to include pertinent information that could
help others help you.  This might include:

     - What version of Nagios you are using
     - What version of the plugins you are using
     - Relevant snippets from your config files
     - Relevant error messages from the Nagios log file

For more information on obtaining support for Nagios, visit:

       http://www.nagios.org/support/

*************************************************************